1) Consumer Unit Upgrade Yaxley · From £700 · NAPIT
Consumer unit upgrades in Yaxley from £700+VAT. NAPIT approved, TrustMark registered, 12-month workmanship guarantee. Call Chris.
Back to top2) Consumer Unit Upgrades in Yaxley, carried out properly and clearly explained
I have been upgrading consumer units for 24 years, including older Yaxley properties where the existing fuse board is well past its best. One recent type of job I regularly come across is a timber-built property still using old BS3036 rewireable fuses. After an EICR, issues were found including no 30mA RCD protection across the installation, including sockets that could be used to supply outdoor equipment.
In that situation, I replaced the old board with an 18th edition compliant consumer unit with surge protection. Each circuit had its own individual RCBO, which helps reduce the chance of nuisance tripping compared with older dual RCD boards. Once finished, I carried out full testing, issued the Electrical Installation Certificate and completed the Part P notification.
What is involved in a consumer unit upgrade
When you call me, I answer the phone myself. I will ask a few questions, then arrange a meeting at the property. I stick to the appointment and explain things clearly, without technical jargon.
Before replacing a consumer unit, I often recommend an EICR first. This gives me a proper idea of the condition of the wiring before fitting a much more sensitive modern board. It can also highlight faults that may cause problems once RCBOs and RCD protection are added.
Back to top3) Why people choose me for this work
I am NAPIT approved and TrustMark registered. I am also very conscientious with this type of work. I would rather check properly at the start than rush into a board change and leave the customer with avoidable problems afterwards.
Consumer unit upgrades are planned electrical work, so I know customers are often comparing quotes. My price starts from £700+VAT following a free survey. The quote includes materials, full testing, certification, building control notification, a 12-month workmanship guarantee, and parts under the manufacturer’s warranty.
Back to top4) What I often see done badly
Some cheaper installs still use dual RCD boards, which can mean several circuits go off together when one fault occurs. I also see mixed brands of circuit breakers fitted into existing boards, loose consumer unit covers, and DIY connections that have overheated or started arcing.
Another common issue is bonding. Gas, water or oil services may need upgrading before or during the work. I also see consumer units changed without an Electrical Installation Certificate or Part P notification, which should be provided.
Back to top5) Materials I use
I regularly use FuseBox consumer units and switchgear. I like them because they are practical to install, well laid out, cost effective and compliant with current UK wiring regulations. Their range also allows for RCBOs, surge protection devices and, where needed, AFDDs.
Back to top6) What happens when you get in touch
I will arrange a free survey, look at the existing board and explain any concerns. You will then receive a clear quote. If you are searching for consumer unit upgrades near me in Yaxley, Farcet, Stilton or nearby villages, I can talk you through the safest option for your property.
Back to top7) FAQ's
How much does a consumer unit upgrade cost?
Prices start from £700+VAT after a free survey. The final price depends on the size of the installation and whether any issues are found before the board is changed.
Do I need an EICR first?
I often recommend one before replacing a consumer unit. It helps identify faults or poor wiring that may cause problems when modern protective devices are fitted.
Will I get certification?
Yes. I provide an Electrical Installation Certificate and complete the Part P building control notification where required.
What type of board do you normally fit?
I often use FuseBox consumer units with individual RCBO protection and surge protection. This gives each circuit its own protection and helps reduce nuisance tripping.
Are you accredited?
Yes. I am NAPIT approved and TrustMark registered.
What guarantee is included?
My workmanship is guaranteed for 12 months. Parts are covered under the manufacturer’s warranty.
Can you upgrade consumer units for landlords or letting agents?
Yes. I work for homeowners, landlords and letting agents, and I provide the correct certification after the work is complete.
Back to top8) Get In Touch
If you are thinking about upgrading your consumer unit, I can visit, check the existing installation and give you honest advice before quoting. No pressure and no obligation.
Call me on 01733 736044
Back to top
