Table of Contents
- Fault Finding in Yaxley for Tripping Electrics and Electrical Faults
- Fault finding in Yaxley based on proper testing
- Real faults I regularly find
- What others often get wrong
- Why homeowners and landlords call me
- What to expect when you get in touch
- Fault Finding FAQ's
- Experiencing an electrical fault in Yaxley?
1) Fault Finding in Yaxley for Tripping Electrics and Electrical Faults
If your electrics keep tripping, lights have stopped working, or part of the house has lost power, I can help find the cause properly rather than guessing. I’m Chris from Kerdon Electrical Ltd, a NAPIT registered electrician based near Yaxley, with over 20 years of experience in fault finding and electrical testing.
A lot of faults are not obvious from the outside. I’ve attended jobs where DIY lighting had been wired incorrectly, with loose connections where terminals had not been tightened properly. I’ve also found water ingress inside garden light fittings, which is a common cause of tripping electrics, especially after wet weather.
Back to top2) Fault finding in Yaxley based on proper testing
When I attend a fault, I start by asking what has happened, when it started, and what circuit or appliance seems to be involved. I’ll then carry out checks to narrow the fault down safely.
This may include testing circuits, checking accessories, inspecting light fittings, looking for signs of heat damage, moisture, poor connections, or previous DIY work. I use a range of test equipment, including a Megger multifunction tester, to help confirm what is happening rather than relying on guesswork.
Back to top3) Real faults I regularly find
Some faults are simple, but others can point to bigger issues. During an EICR, I found multiple unsafe faults in an older installation which needed putting right. These are the sort of problems that can sit hidden until something starts tripping or stops working.
Common issues include loose DIY connections, damaged outside lights, water in garden fittings, poor terminations, and metal light fittings or switches that have not been earthed correctly.
Back to top4) What others often get wrong
One of the biggest problems I see is electrical work that looks finished but has not been tested properly. Loose connections can overheat. Metal fittings without an earth can become dangerous. Outdoor fittings can let in water if they are not installed or maintained correctly.
Fault finding is not just about getting the power back on. It is about finding why the fault happened and making sure it is safe before it is left in use.
Back to top5) Why homeowners and landlords call me
I specialise in fault finding, diagnostics and testing, so this is work I deal with regularly. I work mainly for homeowners and landlords in and around Yaxley, and I’m used to explaining what I’ve found in plain English.
For landlords, fault finding may also link to inspection work, EICRs, or remedial repairs. For homeowners, it is usually about getting the house working safely again with as little disruption as possible.
Back to top6) What to expect when you get in touch
Call, text, WhatsApp or use the website form and tell me what is happening. I’ll ask a few questions, such as what is tripping, whether it happens straight away, and whether it started after any recent work, weather, or appliance use.
I’ll usually arrange a visit so I can test the installation properly. Once I’ve found the issue, I’ll explain what I’ve found and what is needed to put it right.
Back to top7) Fault Finding FAQ's
Why do my electrics keep tripping?
It could be a faulty appliance, damaged cable, water ingress, loose connection, or a problem on a specific circuit. I use testing equipment to narrow it down rather than guessing.
Can you help with lights that keep tripping?
Yes. I often find lighting faults caused by loose DIY connections, incorrect wiring, damaged fittings, or metal switches and lights that have not been earthed correctly.
Do you cover fault finding in Yaxley?
Yes. I carry out fault finding in Yaxley and the nearby villages for homeowners and landlords.
How long does fault finding take?
Some faults are found quickly, while others take longer if the problem is hidden or intermittent. I’ll talk you through what I’m testing as I work.
Are you registered?
Yes. I’m a NAPIT registered electrician and use proper testing equipment, including a Megger multifunction tester.
Can outdoor lights cause tripping electrics?
Yes. Water ingress in garden fittings is a common fault, especially after rain. I’ve attended jobs where outside lighting was the cause of the tripping.
Do you give a quote before repairs?
Where possible, yes. Fault finding often needs an initial visit first, then I can explain the fault and quote for any repair work needed.
Back to top8) Experiencing an electrical fault in Yaxley?
If your electrics are tripping or something does not seem right, please get in touch. I’ll ask a few questions, arrange a visit where needed, and give clear advice on the safest way forward.
